New Vape Rosin Press Frame

11 x 5 Rosin Press Frame

Dual output PID controller fan out

Rosin Press Controller 4.5" Heaters 220v (9372)

13.5 x 5 Rosin Press Frame

Custom Rosin Press Frame

Create your own Custom Set up with a NewVape Frame! If you want to use a hydraulic system that is not in our lineup, send us the height of your pump and we will make a frame for that system. Completely custom!

About this Product

The standard pump opening on this frame is 7.25". You provide the length of the steel beams and we will make it for it to fit your favorite hydraulic pump. 

You can order it by itself or you have the option of adding a set of the plates below. This frame uses either 4x7 or 3x5 or 3x10 plates 

This is the frame only the press plates, and control are not included. Only what's in the product photo.

Included with the Frame

  • Press Dimensions Custom length x 13.5" x 5"   
  • Flip press forward or reverse for gravity dripping into jars. 
  • Precision cage design eliminates plate shifting that causes bag blowouts 
  • Machined collars allow user to customize the opening distance between cycles. This prevents the press from opening all the way. Drastically minimizing the amount of hand pumping required between cycles.
  • 4 Precision 7/8" Dia Stainless Steel Beams
  • 7/8" harden nuts on each end of the Beams. (no aluminum tapped threads)
  • The top, Middle and Bottom plates are all machined from 1 1/4" 6061 billet aluminum. 
  • The Bottom plate is machined from 2" 6061 billet aluminum. 
  • 8 Bronze Bushings are pressed into the middle plate  

About the Optional Bi-Metal Rosin Press plates

  • Bi-metal Plates Utilize Aluminum for fast heat transfer and stainless steel face plates for improved heat distribution. (no hot spots over heater locations)
  • Pressing Surface uses a replaceable Stainless Steel Face Plate, Super Smooth & Durable
$1,032.00
SKU
9369

Maximum 10 characters

About the NewVape Rosin Press

The NewVape Rosin Press is based around a cage design press which utilizes 4 main beams that are 7/8" dia. The movable center plate has precision bronze bushings which keep the press plates aligned and parallel. The accuracy gained with this design helps minimize any plate movement when squishing which helps keep the bags more intact. Unlike other manufacturers, the NewVape Rosin Press uses case hardened 5/8 Nuts on each end of the main beams. NO Aluminum threads here. Even if you believe your current application doesn't require 20 tons you will still greatly benifit from the extra rigidity and precision of this 4 beam design press. 

Different processes of extraction require different pressure points. 

What is solventless extraction

Tradition concentrates have always endured a process of butane-based extraction. Compromising the environment and the people involved through complex processes. That involved costly equipment, toxic chemicals, and low quality results. Enter solventless extraction! As the name implies, it requires no chemicals or solvents to extraction the oils from the plant. The only things you need are heat, pressure, and a tool to harness them. 

Extracting concentrates require a careful balance of pressure and heat. Some processes require different amounts of pressure and heat. Each Strain requires a bit of process adjustment. We suggest beginning at temp 200F and pressing for 45 sec with a 2"x3" small bag.   

Times, Temps, and Mesh Sizes

Material

Mesh Size

Temp

Time

Flower

90-120

190F-220F

15-60 Seconds

Sift & Bubble

25-37

150F-190F

20-60 Seconds

 

The 2x3" bags can hold 1/4 oz of flower

The 3x6" bags hold 1 oz of flower

The prepress make filling the bags to max capacity much easier.  

Write Your Own Review
You're reviewing:13.5 x 5 Rosin Press Frame
Your Rating